Raymarine RAY230E - Page 29

3-7
Operations
FUNC indicatorFUNC indicator
FUNC indicatorFUNC indicator
FUNC indicator
Displayed when the FUNC key is pressed. Disappears when another
key is pressed, or after no other key is pressed for a period of time.
!
WX indicatorWX indicator
WX indicatorWX indicator
WX indicator
Displayed while in Weather Channel or Tri-Watch monitor mode. For
the RAY230E, this indicator only appears in the US frequency mode.
"
TX indicatorTX indicator
TX indicatorTX indicator
TX indicator
Displayed while transmitting.
#
CAN indicator (RAY230 only)CAN indicator (RAY230 only)
CAN indicator (RAY230 only)CAN indicator (RAY230 only)
CAN indicator (RAY230 only)
Displayed when the Canadian frequency group is selected.
$
US indicatorUS indicator
US indicatorUS indicator
US indicator
Displayed when the US frequency group is selected.
%
DESENS indicatorDESENS indicator
DESENS indicatorDESENS indicator
DESENS indicator
Displayed during the desensitized receiving (local) mode.
&
INT indicatorINT indicator
INT indicatorINT indicator
INT indicator
Displayed when the International frequency group is selected.
'
1W indicator1W indicator
1W indicator1W indicator
1W indicator
Displayed when the transmission power of 1W is selected with the
9/1/25 key or when a low power channel is selected.
 
MULTI indicator (RAY230E only)MULTI indicator (RAY230E only)
MULTI indicator (RAY230E only)MULTI indicator (RAY230E only)
MULTI indicator (RAY230E only)
Displayed while the channel stored in Multi-Call memory is displayed.
 
MEM indicatorMEM indicator
MEM indicatorMEM indicator
MEM indicator
Displayed while the channel stored in memory is displayed. This
indicator flashes before the start of the memory scan operation.

SCAN indicatorSCAN indicator
SCAN indicatorSCAN indicator
SCAN indicator
Displayed during Scan mode. If channels have been stored in memory,
this indicator will be flashing before the start of Scan mode.

MEM indicatorMEM indicator
MEM indicatorMEM indicator
MEM indicator
Displayed while the channel stored in memory is displayed. This
indicator flashes before the start of the memory scan operation.
 !
ATIS indicatorATIS indicator
ATIS indicatorATIS indicator
ATIS indicator
Displayed when the ATIS (automatic identification transmission)
feature is turned on (via the Menu mode).