2) Hail Output Control:
Rotating this control clockwise will increase the volume going to the Hailer Horns or
Inter-com Speaker(s) and rotating this control counterclockwise will decrease the
volume.
3) Listen Control:
Rotating this control clockwise will increase the listening volume at the internal speaker
and rotating this control counterclockwise will decrease the volume.
4) Hail Key:
Pressing the [HAIL] key puts the RAY 430 into the hailer mode and HAILER is
displayed on the LCD.
5) FOG (Foghorn) Key:
Pressing the [FOG] key sequentially selects one of the 9 different horn or automatic fog
signals for use.
6) AUX (Auxiliary) Key:
Audio signals connected to the AUX input from radiotelephone, tape player, etc. are
amplified and heard at the selected external speaker location(s).
7) IC (Intercom) Key:
Pressing this key puts the RAY 430 into the Intercom mode.
8) IC 1/2 Key:
Selects between Intercom Station 1 or 2 for connection to the input/output circuitry in
the Intercom Mode. Pressing the [IC 1/2] key, selects IC- 1 , IC-2, in sequence,
alternately.
9) IC 3/4 Key:
Selects between Intercom Station 3 or 4 for connection to the input/output circuitry in
the Intercom Mode. Pressing the [IC 3/4] key selects IC-3, IC-4, in sequence,
alternately.
10) FWD (Forward) Key:
Selects the Hailer horn which is normally mounted on the forward part of the vessel for
use as a foghorn, hailer or public address system.
11) AFT (After) Key:
Selects the Hailer horn which is normally mounted at the rear of the vessel for use as a
fog-horn, hailer or public address system.
12) BOTH Key:
Selects both Hailer horns which are mounted on the forward and rear part of the vessel
for simultaneous use as foghorns, hailing or for public address.
3—2
To Next Page
Loading...
