Raymarine Ray49 - Reprograming Secondary Priority Channel

Chapter 3: General Operations 31
Reprograming Secondary Priority Channel
1. Press and hold the 16/9 key for 3 seconds to switch to the current Secondary
Priority Channel.
2. Press and hold the
16/9 key for 3 seconds again to switch to Reprogram mode.
The message CHG 2ND PRI? appears with YES highlighted.
3. Press the
CH/OK knob to accept. The confirmation message CHANGE 2ND
PRIORITY CH appears.
4. Rotate the
CH/OK knob until the desired new secondary channel is shown.
5. Press
CH/OK to accept the new Secondary Priority selection.
10
15
20
25
30
35
40
45
50
55
60
5
10
15
20
25
30
35
40
45
50
55
60
5
D10120-1
CH 2ND PRI?
>YES
NO
2ND PRIORITY
26 04.2172N
080 09.0933W
AM11:56LOC
SELECT 2ND
PRIORITY CH
PRESS [OK]
TO ACCEPT
SELECT 2ND
PRIORITY CH
PRESS [OK]
TO ACCEPT
2ND PRI CH
IS CHANGED
PRESS [OK]
2ND PRIORITY
26 04.2172N
080 09.0933W
AM11:57LOC