Chapter 4: Menu Settings 41
• International channel set: 15, 17, 75, 76
• US channel set: 13, 17, 67, 77
Overriding the Low Output Power Restriction
In the US, channels 13 and 67 are restricted to transmit at low power. However,
you can temporarily override this low power restriction.
To override the LO power restriction on channels 13 or 67 and transmit at high
power:
1. Press and hold
PTT.
2. While holding
PTT, press and release the HI/LO microphone key
The TX power is set to HI power for as long as you hold down
PTT.
When you release
PTT, power returns to LO.
Saving Channels to Memory
The Ray49 can store any channel (except WX channels) into memory. The stored
channels are the ones scanned in the Saved (Memory) Scan mode (see page 39).
Any number of channels can be saved as memory channels.
Separate memory channel groups exist for USA, International, and Canadian
frequency sets.
D10121-1
BRIDGE
26 04.2172N
080 09.0933W
AM11:57LOC
BRIDGE
26 04.2172N
080 09.0933W
AM11:56LOC
BRIDGE
26 04.2172N
080 09.0933W
AM11:57LOC
To Next Page
Loading...
