Chapter 4: Menu Settings 45
1. From the VHF OPS menu, navigate to CH NAME.
2. Press the
CH/OK knob to select.
3. Rotate
CH/OK to display the channel whose name you want to edit.
4. Press
CH/OK to select. Two options are presented: edit and delete.
5. Press
CH/OK again to select EDIT. The name for the currently-selected chan-
nel appears. The first character is underlined and blinking, indicating that it is
ready to be edited.
6. Use the
CH/OK knob to modify the first character in the NAME field using the
same technique described in “Adding a new Entry“ on page 64.
7. Press
CH/OK to accept and advance to the next character position.
8. Press and hold
CH/OK for 3 seconds when completed. The new name appears
for the channel.
To completely remove the Channel Name, rotate the
CH/OK knob to choose
DELETE in step 5 above, instead, and then press
CH/OK to select. After the name
is deleted, no name is displayed for this channel.
To Next Page
Loading...
