Raymarine S1000 - How do I adjust the autopilot settings?

S1000 Autopilot Installation Guide 19
1.
3.
2.
1.
2.
D7683-1
3.
4.
Mark holes for the fixing screws.
Drill three (3.4 mm) pilot holes for
the fixing screws
Fitting S100 Remote cradle
Secure the cradle.
At fixed position
On belt clip
1
8
/
"
Countersink the pilot holes to prevent
damage to the mounting surface.
To separate cradle from clip
C
l
i
c
k
87040_1.book Page 19 Wednesday, December 22, 2004 12:32 PM