Raymarine S1000 - What is Response?; What is Auto Trim?

22 S1000 Autopilot Installation Guide
Connecting wires
When you need to join thin, data wires, use the Scotchlock connectors provided.
Procedures
D7547-1
Boat hull
Boat hull
RF Ground Plate
Diagram A: Connecting RF ground - preferred method
D7539-1
If the boat does not have a ground plate, use
the alternative method shown in the following
diagram, to connect the RF ground.
Now connect the power
& the autopilot pump
Course computer
POWER PUMP
S1000 Autopilot
Raymarine Ltd
Portsmouth PO3 5TD England
FCC ID PJ5S1000
IC: 4069B-S1000
0191
Product Code: A18107
O
87040_1.book Page 22 Wednesday, December 22, 2004 12:32 PM