20 S1000 Autopilot Installation Guide
[
In-line power switch
D7591-1
inch (5 mm)
maximum
Ensure the protrusion on the
switch barrel goes fully into
the mounting hole.
1.
2.
3.
4.
5.
Cut 11/16" (18 mm)
1
5
/
Locating
Securing
Fit the in-line power switch in a
readily-accessible location.
When all items have been fitted,
connect up the system electrics.
87040_3.book Page 20 Thursday, February 17, 2005 2:01 PM
To Next Page
Loading...
