Race start timer 1
Race start timer 2
to enter Adjust mode.
to set timer value.
To adjust a timer, simultaneously press
AND
OR
To leave Adjust mode, simultaneously press
AND
Water
temperature
In Adjust mode, use
1s to Reset
1s to Reset
1s to Reset
1s to Reset
2s to Reset
2s to Reset
Count-up
timer
ST60 Setup & Operation Cue Card
Introduction
This cue card provides a quick reference guide to the operation and calibration features of
the ST290 Tridata instrument. Unless stated otherwise, all key presses are momentary.
Current
depth
Shallow alarm
threshold
Deep alarm
threshold
Anchor shallow
alarm threshold
Anchor deep
alarm threshold
VMG to
windward
Average speed
Maximum
speed
Boat speed
Log
Trip
Operation
86037_3.fm Page 1 Tuesday, November 19, 2002 7:55 AM
To Next Page
Need help?
General
