Raymarine ST60 Tridata - Page 2

Document number 86037_3 (to be used with handbook: 81040_4)
Date: 1st December 2002
ST60 Setup & Operation Cue Card
Illumination
Enter Illumination Mode
Alarms
Hold down for 1 second
Press repeatedly to cycle through settings
Hold down for 2 seconds
Momentary while alarm value is displayed
Increase value
Decrease value
Switch On/Off
Enter & Exit Adjust Mode
Adjust
Calibration
User Calibration
Depth
Speed
Intermediate Calibration
Dealer Calibration
Depth Units
Depth Offset
Shallow Alarm Lock
Speed Units
Speed Resolution
Log Units
Speed Calibration
(SOG or manual)
Temperature Units
Temperature Calibration
Time Beep (On/Off)
Software Version
Master/Repeater Selection
(manual setting)
Speed Calibration (auto)
User Calibration (On/Off)
Speed Response (Fast/Slow)
Depth Response (Fast/Slow)
Boatshow Mode (On/Off)
Factory Defaults (On/Off)
User Calibration Mode Intermediate Calibration Mode
Dealer Calibration Mode
Exit Calibration Mode & Save Changes
12 seconds
then
2 seconds
4 seconds
2 seconds
86037_3.fm Page 2 Tuesday, November 19, 2002 7:55 AM