Raymarine ST6001+ User Manual

Distributed by
Any reference to Raytheon or
RTN in this manual should be
interpreted as Raymarine.
The names Raytheon and RTN
are owned by the
Raytheon Company.

Raymarine ST6001+ Specifications

General

Display Type	LCD
Power Supply	12V DC
Power Consumption	1.5W
Keypad	Yes
Type	Autopilot Controller

Summary

Basic Operation

Auto Mode

Engaging and disengaging the autopilot in Auto mode.

Track Mode

Entering and exiting Track mode for navigation.

Making Course Changes

Adjusting the vessel's course to port or starboard.

Returning to Previous Locked Heading

Reverting to the last known heading.

Using AutoTack

Executing tacking maneuvers for port and starboard turns.

Wind Vane Mode

Entering and exiting the Wind Vane mode for steering.

Autopilot Adjustments

Adjusting Response Level

Modifying the autopilot's sensitivity for temporary changes.

Adjusting Keypad and Display Lighting

Controlling the brightness of the control unit's keypad and screen.

Displaying Data Pages

Navigating and viewing available operational data pages.

Compass Calibration

Enter Seatrial Calibration

Initiating the compass seatrial calibration process.

Complete the Compass Deviation Correction

Performing the necessary steps to correct compass deviation.

Align the Autopilot Heading

Manually aligning the autopilot's heading with the steering compass.

Save Changes

Saving deviation and heading alignment, then returning to standby.