Preface vii
Preface
Introduction
Thank you for purchasing a Raymarine product. We are sure your ST60+
instrument will give you many years of trouble-free operation.
This handbook describes how to install and use the Raymarine ST60+ Compass
instrument. This instrument gives:
• True/Magnetic Course Heading.
• Current or Locked Heading.
• Course Over Ground (COG).
• Average Heading.
The ST60+ Compass instrument is constructed in a rugged weather proofed case.
It provides a sensitive and stable, combined analog and digital display, to deliver
accurate information under even the most demanding conditions.
The ST60+ Compass instrument provides Compass Heading, shown in digital
form (numerals) plus (when in Locked mode) Steering Course Error to ±30
°
deviation of locked course heading, shown in analog form (pointer). The Compass
instrument can be used either as a stand-alone unit, or as part of an integrated
SeaTalk instrumentation system.
Data inputs
The ST60+ Compass instrument receives data either from an associated Flux Gate
Compass transducer and/or from a SeaTalk instrumentation system.
D8193-1
C
OM
PAs
ST60
+
DISP
LOCK
81265_1.book Page vii Monday, December 5, 2005 9:23 AM
To Next Page
Loading...
