Raymarine ST70 - Parts Not Supplied

8
2.4 Parts not supplied
The ST70 autopilot controller is connected to a SeaTalk or SeaTalk
ng
data system. To
install the controller to your system correctly, you may require additional cables and
connectors.
Optional cabling and connectors
Depending on the location of your ST70 autopilot controller, you may require a longer
cable to connect it to the SeaTalk
ng
backbone cable.The backbone cable is supplied
as part of a standard kit. Detailed information on SeaTalk
ng
connectivity is available in
the SeaTalk
ng
Reference Manual supplied with the SeaTalk
ng
backbone kit. For
further information, talk to you dealer or visit the Raymarine website:
www.raymarine.com.
D10420-1
Spur cable
Backbone kit
Part number
A25062
A06038 - 1 ft 3 in (400 mm)
A06039 - 3 ft 3 in (1 m)
A06040 - 9 ft 10 in (3 m)
A06041 - 16 ft 4 in (5 m)
Backbone cable -
16 ft 4 in (5 m), (x 2)
65 ft 7 in (20 m)
T piece, (x 4)
Backbone terminator, (x 2)
Power cable
87071-1.book Page 8 Monday, April 21, 2008 3:34 PM