2 ST70 Pilot Controller Reference Guide
1.2 Display and controls
Controls
Display
Menu mode
Each setup menu provides a number of options. Use the < and > buttons to set a value
or change the option.
When a menu selection results in a setup page, use the < and > buttons to set the
value or make the selection that you want. Press
ENTER
to confirm your choice.
If at any time during setup you want to leave a setup function without making any
changes, press
CANCEL
.
STANDBY When in Standby mode:
- Press momentarily to display the Brightness popup.
- Hold down to power off.
When in Auto mode: Press momentarily to put unit in standby
DODGE Activate Dodge mode.
TRACK Activate Track mode.
AUTO Activate Auto mode.
MENU Open the control menus.
< / -1
When in Pilot mode: -1° (port)
When in Menu mode: Cursor LEFT /decrease value (hold to decrease auto-
matically)
> / +1
When in Pilot mode:+1° (starboard)
When in Menu mode: Cursor RIGHT/increase value (hold to increase auto-
matically)
CANCEL / -10 When in Pilot mode: -10° (port)
When in Menu mode: Cancel and go back a step without making any
changes
ENTER / +10 When in Pilot mode: +10° (starboard)
When in Menu mode: Accept value and go back a step
To choose option 1
press
To choose option 3
press
Press ENTER to select
Menu Title
Selected option
i
123
D10031-1
Information box
To Next Page
Loading...
