Raymarine ST70 - Page 19

Chapter 2: Setup Procedures 11
1. Use < and > to scroll to the Data Boxes box and
press
ENTER .
2. Use < and > to scroll to the box whose contents
you want to change.
3. Use < and > to select the data you want to be
displayed.
4. Press
ENTER to accept the new value and exit,
or
CANCEL to exit without making any change.
Press ENTER to select.
Display Settings
Data Boxes
i
D10818-1
Select data for the data boxes.
Press ENTER to select.
Data Boxes
Box 1
i
D
10817-1
Select the data for box 1.
Press ENTER to select.
Data Boxes
i
D10934-1
Select data to be shown.
Press CANCEL to exit without saving.
SOG