Raynor ControlHoist CMT - Operator Installation; 3.1 Assembly Instructions

6
3 Operator Installation
3.1 Assembly Instructions
CAUTION
The operator has exposed moving parts and to prevent access to the pinch points, this operator must be installed
at least 8 feet (2.44 m) or more above the floor. Alternatively, covers or guarding, provided by the manufacturer,
must be installed when the operator is mounted less than 8 feet (2.44 m) above the floor.
NOTICE
• Install the operator only when all openings of a horizontal slide door are guarded or screened from
bottom of the door to a minimum of 4 ft (1.22 m) above the ground to prevent a 2-¼ in (57.2 mm)
diameter sphere from passing through the openings anywhere in the door.
For technical support, please call 1-800-4-Raynor (1-800-472-9667) or visit www.raynor.com
Attach tracks to operator
Assemble carriage
Slide carriage on track
Bolt 3/8-16
Nut 3/8-16
Lock washer 3/8
Lock washer 3/8
Take-Up Bolt 3/8-16
Nut 3/8-16
Carriage
Track
Operator Side
Bolt 3/8-16
Nut 3/8-16
1
2
3