EasyManua.ls Logo

Raypak Professional PS10353ti-E-HC User Manual

Raypak Professional PS10353ti-E-HC
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTALLATION & OPERATING
INSTRUCTIONS
Catalog No. 6000.554 Effective: 12-21-11 Replaces: NEW P/N 241460 Rev. 1
FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors and
liquids or other combustible materials in the vicinity of this or any other appliance. To
do so may result in an explosion or fire.
Professional Series
PS10353ti-E-HC
PS10354ti-E-HC
PS10355ti-E-HC
Heat Pump
Pool & Spa
Heater
USC
L
I
S
T
E
D
R
NOTE: The instructions in this manual are for the use of qualified individuals specially trained and experienced
in the installation and maintenance of this type of equipment and related system components. Installation and
service personnel are required by some states to be licensed. Persons not qualified shall not attempt to install,
service, or maintain this equipment.
This manual should be maintained in legible condition and kept adjacent to the heat pump pool heater or in a
safe place for future use.
Question and Answer IconNeed help?

Do you have a question about the Raypak Professional PS10353ti-E-HC and is the answer not in the manual?

Raypak Professional PS10353ti-E-HC Specifications

General IconGeneral
CategorySwimming Pool Heater
Heat Exchanger MaterialTitanium
ModelPS10353ti-E-HC
Heating Capacity103, 000 BTU
Efficiency80%
Voltage240V
Warranty5 years

Summary

Warnings - Pay Attention to These Terms

Elevated Water Temperature Hazards

Guidelines on safe water temperatures and risks associated with high heat.

Chemical Content Risks

Warnings about improper pool chemical use and potential damage to the heater.

Refrigerant Safety

Safety precautions regarding the refrigerant used in the heat pump.

Installation Considerations

Electrical Connections

Water Connections

Controls

Digital Water Temperature Control

Details the digital control system for pool and spa temperature settings.

Operating Instructions

Freeze Protection

Troubleshooting

A. UNIT IS RUNNING, BUT NOT HEATING

Diagnosing issues when the unit runs but does not heat the water.

B. UNIT IS NOT RUNNING

Diagnosing issues when the unit fails to start or operate.

Wiring Diagram 208V/230V 3Ph, 60Hz Models

Wiring Diagram 460V 3Ph, 60 Hz Models

Wiring Diagram 380V 3Ph, 60 Hz Models

Installing a Remote Control Device

Related product manuals