RayTek MX6 - Reference Tables and Defaults; Common Material Emissivity Values; Factory Default DIP Switch Settings

49
Appendix B
48
Appendix B
Aluminum* 0.30
Asbestos 0.95
Asphalt 0.95
Basalt 0.70
Brass* 0.50
Brick 0.90
Carbon 0.85
Ceramic 0.95
Concrete 0.95
Copper* 0.95
Dirt 0.94
Frozen food 0.90
Hot food 0.93
Glass (plate) 0.85
Ice 0.98
Iron* 0.70
Lead* 0.50
Limestone 0.98
Oil 0.94
Paint 0.93
Paper 0.95
Plastic** 0.95
Rubber 0.95
Sand 0.90
Skin 0.98
Snow 0.90
Steel* 0.80
Textiles 0.94
Water 0.93
Wood*** 0.94
*oxidized
** opaque, over 20 mils
***natural
Table of emissivity values of common materials
The DIP-switches are located in the battery
compartment (8). In the beginning we recom-
mend you use the default DIP-switch settings.
DIP switch settings - Factory Defaults
Lock
°C/°F
Auto/All
Laserflash
Ltd. Access
Set Default
Backlight
Buzzer
TC-J/TC-K
NTC/TC
Time/Date
Photoflash
ON
ON
Lock
Auto/All
Laserflash
Ltd. Access
Set Default
Backlight
Buzzer
TC-J/TC-K
NTC/TC
Time/Date
Photoflash
°C/°F
Factory Defaults
DIP-Switch Settings
Celsius setting shown
Fahrenheit setting shown