3
ASSEMBLY AND SET-UP
WARNING:
Keep fingers clear of the pivoting
mechanism when folding or
unfolding the scooter. Make sure
others are standing clear.
Unfolding the Scooter for First Time Use
1 To release the folding mechanism, place the
scooter on the ground, put one foot on the deck
plate and pull the Anti-Rattle knob up.
Raise T-bar up until it is securely locked in the
upright position.
Note: The Anti-Rattle knob is spring-loaded and
will automatically lock in the upright position
when fully upright.
Note: To activate the anti-rattle feature twist the knob to the right to tighten. Please note there is no need
to over tighten.
To Next Page
Loading...
