Need Help? Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
Remove contents from box. Remove the separators that protect the components from damage during shipping.
Inspect the contents of the box for scratches in the paint, dents that may have occurred during shipping. Because
your scooter was assembled and packed at the factory, there should not be any problems, even if the box has a few
scars or dents.
WARNING: DO NOT USE
NON-RAZOR PRODUCTS WITH
YOUR SCOOTER.
Razor scooters have been built to
certain Razor design specifications.
The original equipment supplied at
the time of sale was selected on
the basis of its compatibility with
the frame, fork and all other parts.
Certain aftermarket products may
not be compatible and will void the
warranty.
Product ID Locations:
1. Side of Deck Plate
2. Box - side of UPC (not shown)
Box Contents:
• Scooter
• Allen Wrench
• Owner’s manual
Quick-Release Lever
Extension Tube
Anti-Rattle Mechanism
T-bar
Collar Clamp
Kickstand
Required Tools
5 mm Allen wrench
BEFORE YOU BEGIN
To Next Page
Loading...
Need help?
General
