Need Help? Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
Inflating the Tire
The tires are inflated when shipped, but they invariably may lose some pressure between the point of manufacturing
and your purchase. Always inflate tire to the correct PSI before first time use.
Periodically check both tires. Reinflate when needed.
1 Using a bicycle-style tire pump
equipped for a Schrader-type valve,
inflate the tires to the correct PSI indi-
cated on the sidewall of the tires.
ASSEMBLY AND SET-UP
Anti-rattle Folding Mechanism
To fold scooter you must first deactivate the anti-rattle feature. Twist the knob to the left until loose. No need to loosen
the knob more than one full turn. Pull the Anti-Rattle knob up to fold.
WARNING: Inflate the
tires to the recommended pressure
(60 PSI) before riding. Do not exceed
the tires’ PSI rating. Over inflation
will cause a rupture and under
inflation may cause additional wear
on the tire.
To Next Page
Loading...
Need help?
General
