Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
4
ASSEMBLY AND SET-UP
WARNING:
Keep fingers clear of the pivoting
mechanism when folding or
unfolding the scooter. Make sure
others are standing clear.
Unfolding the Scooter for First Time Use
1 To release the folding mechanism, place the
scooter on the ground. Pull the Anti-Rattle knob up to
raise T-bar.
3 Turn knob clockwise to tighten and engage the Anti-Rattle mechanism. Note there is no need to overtighten.
To fold, loosen the Anti-Rattle knob (by turning knob counterclockwise) prior to pulling up the Anti-Rattle knob to
release the folding mechanism. For instructions on folding see page 8.
2 Turn knob completely counterclockwise then
continuing raising T-bar until T-bar is locked in the
upright position.
To Next Page
Loading...
