A
B
C DD C
30
Pass each shoulder strap through the inside of slot C on the MBP then back out
through slot D.
The Harness should assume a “Heart Shape” at this point with the shoulder
straps entering on the inside of the MBP and the Waist Straps exiting on the
outside.
Tighten the shoulder straps until you have a snug fit which is even on both sides
with the DSP and MBP centered along the midline of your back and the MBP at
the desired height.
Step 1: Rigging the Razor Harness
4 Rigging the Razor Harness 2.5
To Next Page
Loading...