a
Version 1 is the tuffer but more streamlined one. To be able to make
this work you have to run the webbing on the inside of the Tri-glide.
b
Version 2 is the way easier way since you can run the webbing on the outside
back through the Wide Gauge Tri-glide. The closing system then is not bent to
your body but on the other side you can see one Razor logo more engraved ;)
B
A
41
Attach the Low Profile Buckle to the left hand side of the webbing leaving
plenty of extra webbing for adjustments of the harness. You have 2 possibili-
ties - version A or B
4 Rigging the Razor Harness 2.5
Step 7: Fitting the Low Profile Buckle
To Next Page
Loading...