77
The BAT Wing Rear Bungee is designed to secure the bottom of the
BAT Wing in a low profile streamlined position even when the wing
is inflated and still give easy unrestricted access to all of the Razor
Harness attachment points.
The Rear Bungee is secured to the BAT Wing with the Wing Tab and
the BAT Wing can be quickly and easily removed from the Razor
Harness by undoing the button head screw leaving just the Wing
Tab and bungee cord still attached to the MBP.
The bungee cord is attached to the Wing Tab with a Lark’s Head
Hitch (aka Lanyard Hitch). The bight of the Larks Head should
be on the outside of the wing tab.
Step 3: Attaching and Adjusting the BAT Wing Rear Bungee
to the Razor Harness
2 Rigging the Razor BAT Wing
To Next Page
Loading...
Need help?
General