48
Weights can be added easily to either the Lumbar T Weight Belt or the Waist T
Weight Belt or to both if required.
The optimal positioning for ballast weight assuming neutral trim is to either side
of, or just above the MBP using both the Lumbar and Waist strap of the T Weight
System.
When using the BAT Wing this ensures that the center of gravity is also the center
of buoyancy thereby increasing stability and control.
If more head down trim is required which is often the case when side-mounting due
to the tanks being lower on the diver and dropping the center of gravity towards
the feet then more of the ballast weight can be positioned higher on the Lumbar
Strap of the T Weight System or placing a Weight Pouch higher on the Pocket
Weight System to counteract this.
If more head up trim is required due then more of the ballast weight should be
positioned lower at the Waist Strap of the T Weight System
4 Rigging the Razor Harness 2.5
Step 9: Weighting and Trim
To Next Page
Loading...