WIRING CONNECTIONS HeatNet Control V3
Page 79
Status information screens
This screen indicates the control is attempting to re-
initiate the ignition control because the ignition
control did not begin PRE-PURGE. For more
information see CALL SERVICE LOG entry.
This screen indicates that the boiler’s has received a
heat demand, but its MINIMUM OFF time has not
expired.
This Screen indicates that the boiler’s input is
temporarily being limited to optimize the boiler’s
efficiency.
This screen indicates that the boiler is running in
LOCAL MODE because it has lost H-NET
communications with the MASTER, and the failsafe
mode has been activated.
This screen indicates the DHW: MAX RUNTIME
(adjustable) has exceeded its limit. The programmed
DHW: HOLDOFF time (adjustable) is now in effect.
During the hold off time the system is now able to
satisfy a space heating call then release back to the
DHW demand when the hold off time has expired.
To Next Page
Loading...
Need help?
General
