15
Phone Settings
1. Make sure your phone is in idle mode. (not in Talk mode)
2. Press the MENU Soft key (left) to go to the main menu.
3. Press VOL (- or +) button to scroll to Phone Settings.
4. Press OK Soft key (right) to conrm and you may program the following items:
Date/Time
Sound Settings
Dial Mode
Area Code
2nd Call Alert
Restore Setting
Date/Time
From the Phone Setting Menu:
1. Press the VOL (- or +) button to scroll to Date/Time .
2. Press OK Soft key to conrm and you may program the following items:
Set Date/Time
Set Format
Set Date/Time
From the Date/Time Menu:
1. Press the VOL (- or +) button to scroll to Set Date/Time .
2. Press OK Soft key.
3. LCD will display last-set time (or, if the device is new or has been reset to default, the LCD will display
12:00AM 01/01/10)
4. Use the dial-pad to enter digits for the current time and date.
5. A conrmation tone will indicate that your selection has been saved.
Important: If phone is set to the 12 Hour time format, remember to use the AM/PM Soft key to
select AM or PM before pressing OK.
NOTE: Enter the Year as a 2-digit number. For instance, enter 10 for 2010, 11 for 2011, etc.
NOTE: If you subscribe to Caller ID service, the current Date/Time is set automatically when you
receive your rst CID record and will override the previously set Date/Time. However the year must
still be set manually.
Set Format
From the Date/Time Menu:
1. Press the VOL (- or +) button to scroll to Set Format.
2. Press OK Soft key to conrm and you may program the following items:
Time Format
Date Format
To Next Page
Loading...
Need help?
General
