12
Contrast
1. Press Menu button once, then press the VOL ( + or -) buttons until PHONE SETTING is
displayed.
2. Press Select/Save button to select.
3. Scroll the VOL ( + or -) buttons of the sub-menu until CONTRAST is displayed.
4. Press Select/Save button to select
5. Scroll the VOL ( + or -) buttons to select the LCD contrast level.
6. Press the Select/Save button to save.
Area Code
1. Press Menu button once, then press the VOL ( + or -) buttons until PHONE SETTING is
displayed.
2. Press Select/Save button to select.
3. Scroll the VOL ( + or -) buttons of the sub-menu until AREA CODE is displayed.
4. Press Select/Save button to select
5. Use the number pad to enter your three digit area code. The default is “---“.
6. Press the Select/Save button to store the setting.
Regional Code
1. Press Menu button once, then press the VOL ( + or -) buttons until PHONE SETTING is
displayed.
2. Press Select/Save button to select.
3. Scroll the VOL ( + or -) buttons of the sub-menu until REGIONAL CODE is displayed.
4. Press Select/Save button to select
5. Use the number pad to enter your three digit area code. The default is “---“.
6. Press the Select/Save button to store the setting.
Clear All Memory
1. Press Menu button once, then press the VOL ( + or -) buttons until PHONE SETTING is
displayed.
2. Press Select/Save button to select.
3. Scroll the VOL ( + or -) buttons of the sub-menu until CLEAR ALL MEM is displayed.
4. Press Select/Save button to select
5. Scroll the VOL ( + or -) buttons to select YES.
6. Press the Select/Save button to clear all the records in the phonebook memory.
Connections and Setup
To Next Page
Loading...
