4.Press the CONFERENCE button.
5.Speak to both parties.
NOTE: If you have more than one party on hold (telephone line or intercom), you must select
the line for the party you want to conference with.
To disconnect one party:
Press the line or intercom button for the person you want to continue speaking with, and
the other party is automatically disconnected.
To disconnect both parties:
Hang up the handset, or press the SPEAKER button.
each party individually.
Intercom 3-way Conference Calls
This feature allows you to have a 3-way conversation using the intercom feature only.
1. Make or answer an intercom call.
2. Press the Hold button, the intercom call is on hold with the Intercom LED ashing.
3. Press the Intercom2 soft key, you can enter the extension number to make another
intercom call.
4. Press the CONFERENCE button to enter 3-way conference mode.
To disconnect one party:
Press the intercom button to talk with the rst intercom only, or press Intercom2 soft key
to talk with the 2nd intercom call only.
Paging All Stations
This feature allows you to make an one-way announcement to all other stations connected
to the network that are not currently in use.
1. Press and hold the intercom button for 2 seconds and using Up/down button to select
"Page all stations", then press Select softkey to enter page all station mode. The other
stations not in use automatically activate their speakerphones and receive your page.
2. Speak in Speaker mode or pick up the corded handset to speak. You have 30 seconds to
page in this mode. After 30 seconds, the page is cancelled.
46
NOTE: Paging can be done with optional headset. Plug in the headset, follow step 1 and then
NOTE: If there is cordless handset registered, press and hold the Page button to enter the
“Page the Handset”, “Page all stations” and “Deregister Handset” selection menu.
a. When you select the “Page the handset” menu, the unit will page the cordless handset only.
To Next Page
Loading...
Need help?
General
