To Next PageTo Next Page
Need help?Do you have a question about the RCA ANT705Z and is the answer not in the manual?
General| Reception Range | 70 miles |
|---|---|
| Color | Black |
| Smartpass Amplifier | Yes |
| Range | 70 miles |
| Impedance | 75 Ohms |
| Connector Type | F-type |
| Type | Outdoor |
| Mounting | Mast mount or wall mount |
| UHF Frequency Range | 470-700 MHz |
Main structural component of the antenna for mounting other parts.
Elements that reflect radio waves for improved signal reception.
Parts used to secure the reflectors to the antenna boom.
Enclosure for the balun, connecting antenna elements to the coaxial cable.
VHF reception elements that fold for compact design and storage.
UHF reception elements designed with an X-shaped configuration.
Bracket used to attach the antenna assembly to a mast or pole.
Bracket for mounting the antenna onto a flat surface.
A pole designed for mounting the antenna for optimal signal reception.
Collection of nuts, bolts, strap, and boot for assembly and weather protection.
Securely attach the two reflectors to the antenna boom using clamps and bolts.
Connect the balun housing to the bottom of the antenna boom.
Install VHF dipoles and the aluminum shorting strap onto the balun housing.
Mount the UHF dipoles onto the front posts of the balun housing.
Secure the antenna bracket to a flat surface using screws.
Insert the J-pole mast into the antenna bracket and secure it.
Attach the assembled antenna to the J-pole mast using the mounting bracket.
Connect a coaxial cable from the antenna to the TV, using weather boot outdoors.
Connect the other end of the coaxial cable to your television's antenna jack.
Perform a channel scan on your TV for detailed instructions.
