Using the Monitors
36 Chapter 2
Appears when the time base corrector is turned on (see page 48).
Appears during playback. It is not recorded. An M appears in front of
the time counter when memory-stop is on (see page 49).
Indicates the approximate time remaining on the tape.
Indicates the quality of picture you have selected and the number of
pictures remaining for that quality (see page 59).
Indicates the type of snapshot selected (other than FULL) (see page 60).
• P is displayed for PIN-UP.
• M4 is displayed for MULTI-4.
• M9 is displayed for MULTI-9.
TBC (Time Base Corrector) Icon
TBC
Time Counter Icon
M0:00:00
Time-Remaining Icon
120MIN
Picture Quality Icon
FINE 30
Snapshot Icon
P
To Next Page
Loading...
