To Record the Date, Time, or Title Display on Your Tape
1. Place the camcorder in the record-
* This display mode has just been
pause mode.
selected with
DISPLAY.
2. Press
DISPLAY
to display the mode
l
The tape has been changed or the
you want to record in the viewfinder.
tane comuartment opened.
The mode you select will be recorded
whenever it appears in the viewfinder.
If you select either auto mode
(AUTO
DATE
or auto date titler), it will
automatically appear, be recorded for
five seconds, and then disappear
whenever:
l
The date has been set or changed.
3. Press
DISPLAY
to remove the display
from the viewfinder when you are
finished recording it.
4. To record the display again, place the
camcorder in record pause and press
DZSPLA Y.
31
To Next Page
Loading...
Need help?
General
