,
Y
Button
Select the Date, Time, or Title You Want to Record on Your Tape
The clock cell must be installed and the
date and time set before they can be
selected and recorded.
1. Attach a power supply and place
POWER switch in
CAMERA.
The
POWER indicator will light.
2. Press
DISPLAY
to select one of the
displays.
l
Date Display:
The date will be
displayed and recorded.
l
Auto Date:
The date will be
automatically recorded for
approximately five seconds.
l
Auto Date Titler Display:
The date
is automatically recorded across the
center approximately four times
larger than the normal displays.
30
l
Time Display:
The time will be
displayed and recorded.
l
TV On-Screen Display: The
viewfinder displays will appear on
the screen of a TV connected to the
camcorder during record pause.
l
Date Off:
No date or time will be
displayed or recorded.
l
Titler Display:
The title you created
will be displayed and recorded.
Note: If no title has been created,
SET
CHAR appears and a title can be created.
Details are on page
32.
To Next Page
Loading...
Need help?
General
