2425
The DVD Operation
The DVD Operation
DVD Setup Mode
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
Basic Operation
1. Press SOURCE button on the remote control and select
DVD mode.
2. Insert disc into the loading slot located on right side
of the TV. Make sure that you load the disc with the sliver
side facing you ( label side face away from you). The disc
will be read and after a short time will automatically start
playing.
3. Press button on your unit or on remote control to eject the
DVD disc.
Note: DVD mode must be selected before a disc is loaded.
configuration system setup, language setup,
audio setup and digital setup.
by using the Navigation buttons and OK button.
e remote control to switch to DVD mode.
press or button to enter the submenu. Press button to return to the previous menu.
This player supports different TV outputs,
including AUTO, NTSC and PAL system.
Select suitable option according to the
color system of your TV.
When the screen saver is on, when the DVD
player is in stop, no disc state or there is a
frame frozen for more than about 3 minutes,
the screen saver will be displayed. This
feature can protect the screen from damage.
( press SETUP button in DVD mode)
LED TV DVD COMBO OPTIONAL
PAUSE EJECT
4. Press button to play on pause the DVD disk.
To Next Page
Loading...
Need help?
General
