RCA MINI YAGI

1
MINI YAGI
HD ANTENNA
User’s Guide
What’s in the box?
(1) Main
antenna
boom
(1) U-bolt
(1) Mast clamp
(1) Balun housing and
middle element
(1) Rear element
(12) Element
end caps
(3) Screws
(2) Wingnuts
(2) Boom end
caps
Assemble the antenna
1. Attach the balun housing and middle element to the antenna boom.
Line up the holes in balun housing/middle element with the holes near the middle of the boom.
Place 2 screws through the balun housing/middle element and boom as shown. Tighten the screws
so that the balun housing/middle element is securely in place.
Holes
Antenna
boom
Balun housing /
middle element
Screws
ANT721E US IB 01

RCA MINI YAGI Specifications

General

Brand	RCA
Model	MINI YAGI
Category	Antenna
Language	English

Summary

Whats in the box?

Assemble the antenna

Attach Balun Housing and Middle Element

Line up holes and secure balun housing/middle element to the antenna boom with screws.

Attach Rear Element to Antenna Boom

Slide rear element into boom, align holes, and secure with screw.

Attach Element and End Caps

Place element caps on element ends and end caps on antenna ends.

Mount the antenna

Assemble Mounting Clamp

Insert antenna boom into mast clamp and secure with U-bolt and wingnuts.

Mount Antenna onto Mast

Loosen wingnuts for mast insertion, then tighten to secure antenna.

Connect the antenna to your TV

Connect Coaxial Cable to Antenna

Connect one end of coaxial cable to antenna's jack, use weather boot outdoors.

Connect Coaxial Cable to TV

Connect the other end of the coaxial cable to your TV's antenna jack.

Scan for TV Channels

Refer to your TV's owner's manual for channel scanning instructions.

12 Month Limited Warranty