Need help?Do you have a question about the RCA BPA-10 and is the answer not in the manual?
Details operating limits, antenna resistance, line impedance, and monitoring rectifier specifications.
Lists the vacuum tubes used in the unit.
Provides dimensions and net weight of the tuning unit.
Explains the dual function of matching antennas and suppressing carrier harmonics.
Describes the weather-proof housing, access door, and internal components.
Explains the T-section low-pass filter design and its components.
Instructions for mounting on platforms or cradles, and securing the unit.
Details antenna lead-in posts and connection methods for different line types.
Explains connections for remote metering and audio monitoring equipment.
Notes on static drain requirements and tower lighting compatibility.
Discusses impedance matching and antenna tuning principles for the unit.
Step-by-step guide for tuning using an RF bridge and impedance measurements.
Method for tuning using a substitution technique when an RF bridge is unavailable.
Procedure to verify tuning adjustments with line current measurements before full power.
Information on setting up and using the remote antenna current monitoring system.
Guidelines for inspecting connections, ensuring tightness, and maintaining ventilation.
To Next Page
General
