EasyManua.ls Logo

RCA Pearl TH1100

RCA Pearl TH1100
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Settings
Press to enter the Settings menu and then
press or to highlight an item. Press
repeatedly to change settings.
Backlight:
to adjust the time before the display light
turns off (On/10s/20s/30s).
to adjust the color of the display light
(Red/Blue/Green/Yellow/Cyan/Purple/White).
Power Save(Off, 1m, 2m, 5m and 10m): to
adjust the duration for automatic shut down
when the player is idle.
Language: to select the menu’s language.
Restore Defaults: to reset all menus to factory
defaults.
System Info
Press to show the amount of free space
available and the firmware version.
17
EN
Player’s Menus
Additional Information
Tips and Troubleshooting
Problem: Player repeats same tracks or all
tracks.
Repeat play is turned on. Refer to the Repeat
section on page 16 on how to access and
change the repeat setting.
Problem: Audio distorted at high volume.
Change the DSP mode to Flat.
–Turn down the volume.
Problem: The audio tracks on my player keep
skipping or popping.
–You’ll need to re-record the audio track – make
sure you close all other applications on your PC
when you record.
–Try recording with Error Correction setting
turned on.
Problem: Player turns itself off.
–Your player turns itself off if you leave it in
pause mode or navigation mode for the
duration specified in Power Save setting.
Problem: The player cannot be turned on.
Battery is empty.
Ensure the keys lock is not activated.
Reset the player by removing and re-installing
of the battery.
If the player still cannot be turned on after
resetting, perform a firmware upgrade to
restore it.
Please go to http://www.rcaaudiovideo.com/faq
for more details.
Problem: Player does not respond to key
presses.
If your player stops responding to key presses,
you can reset it by removing and re-installing
of the battery. Most of your settings will be
preserved; only the settings that you have
changed after your last power off will be lost.
Make sure the Hold switch is not on by sliding
the "Power on/off ( )/Hold" switch to the
left."

Table of Contents

Other manuals for RCA Pearl TH1100

Related product manuals