52
Attaching the Shoulder Strap
Removing the Lens Hood
Caution: When carrying the camcorder with the shoulder
strap, you may find it convenient to rotate the viewfinder
down. This helps prevent possible damage to the viewfinder
from bumping against your body as you move.
The shoulder strap packed with your camcorder is designed to let you carry the
camcorder from your shoulder and – when you are ready to shoot – bring the
camcorder to shooting position in one quick movement.
To Attach the Shoulder Strap
1. Thread each end of the strap through one of the attachment rings as shown below.
2. Thread each end of the strap back into its buckle. Pull on the strap and make sure it
is securely fastened before using the shoulder strap to support the camcorder.
Attachment Ring
Attachment Ring
The lens hood can be removed so you
can attach optional accessories.*
To remove the lens hood, turn it
counterclockwise.
*Optional accessories may be available from
camera shops and electronic supply stores.
To Next Page
Loading...
