RCA Prodigi RDR1520 Series User Manual

Copyright © 2019 RCA Communications Systems
17Prodigi
TM
RDR1520 Series Professional Digital Two-Way Radio Instruction Manual
6. If “CH free indication” was enabled, you
will hear the short beep tone when your
partner release PTT, it means the channel is
free and wait for your response. Press PTT
to respond, if there is no talking on this
channel in a preset time, the call ends.
Single Call
1. Rotate the channel knob, use the user’s ID
to select the channel.
2. Hold the radio 1-2 inches (2.5-5cm) distance
from your mouth.
3. Press PTT to transmit the call; the LED
indicates red.
4. You hear the Call permit tone (if enabled)
and speak into the mic.
5. Release PTT to receive, LED indicates green
if your partner is answering.
6. If “CH free indication” was enabled, you
will hear the short beep tone when your
partner releases PTT, it means the channel
is free and waiting for your response. Press
PTT to respond, if there is no talking on this
channel in preset time, the call ends.
7. You will hear a short beep tone.
All calling
This function lets you send calls to all users
in this channel. This function must PC
programmed.
1. Rotate the channel knob, use the All Calling
ID to select the channel.
2. Hold the radio 1-2 inches (2.5-5cm) distance
from your mouth.
3. Press PTT to transmit the call; the LED
indicates red.
4. You hear the Call permit tone (if enabled)
and speak into the mic. Other users in this
channel cannot respond to the all calling.
Use One Touch Access Key to Send
Group Calls or Single Calls
One touch access function lets you easily send
the group call or single call to the preset ID or
contacts. This function can be assigned to the

RCA Prodigi RDR1520 Series Specifications

General

Brand	RCA
Model	Prodigi RDR1520 Series
Category	Two-Way Radio
Language	English