To Next PageTo Next PageWhat to do if the keys on my RCA Two-Way Radio are not working?
If the keys on your RCA Two-Way Radio are not working, there are a couple of potential causes: 1. The crystal connector might be inserted improperly or not inserted at all. Ensure it is correctly inserted. 2. The keys may have temporarily failed. Try restarting the radio.
Why is there no display on my RCA Two-Way Radio?
If there is no display on your RCA Two-Way Radio, the LCD may have temporarily failed. Try restarting the radio to resolve this.
What to do if my RCA Two-Way Radio cannot lock out?
If your RCA Two-Way Radio cannot lock out, this feature may have malfunctioned temporarily. Restart the radio to see if this resolves the issue.
General| Channels | 22 |
|---|---|
| Battery Life | Up to 10 hours |
| Privacy Codes | 121 |
| Power Output | 0.5 Watts |
| Included Accessories | Belt clip |
Radio’s display icons indicating status like low power, speaker, scan, etc.
Details on Single Zone Scan and Multi Zone Scan for scanning channels.
Procedures for initiating and stopping the scanning process.
Explanation of Carrier Operated Scan and Time Operated Scan resume modes.
How the radio checks priority channels for activity and switches to them.
Methods for adding or temporarily deleting channels from the scan list.
Feature enabling/disabling 2-Tone to control radio mute/unmute based on signaling.
Function to reverse Tx/Rx frequencies to re-establish communication with repeaters.
How to toggle the Talk Around feature ON or OFF for direct radio-to-radio communication.
Activating the PA feature to amplify microphone audio for external speaker output.
Toggling the Scrambler feature ON or OFF for voice privacy and encryption.
Selecting preset numbers or aliases from the MDC list for calls.
