C
Chelsea SmithAug 12, 2025
What to do if my RCA BR200V cannot talk to or hear other members?
- MMr. Daniel PittmanAug 12, 2025
If you cannot communicate with other members using your RCA Two-Way Radio, consider the following: * Verify that other callers are using the same channel. * Ensure that the CTCSS/DCS signaling is identical. If not, contact your RCA Communications Systems dealer about reprogramming. * Confirm that the setting of the selective signaling 5-Tone in the RX Squelch Mode is correct. * Make sure that all members are within the communication range.