RCA RPJ119 User Manual

Connect Audio Output ( Aux Out / Line Out / Earphones)
Follow below picture to connect audio cable and device.
1. Press the button to turn off power of your projector before connection.
2. Use audio cable to connect follow below figure.
3. After connect and turn on both units. Your projector sound from external
device now.
4. After using , turn off both unit
Install USB Device And Micro Sd Card “TF”
Follow below picture to install USB and TF card
Turn off the unit before install USB / TF card.
13
MICRO SD
CABLE NOT INCLUDE
Station Amplifier
Audio cable

RCA RPJ119 Specifications

General

Light Source Type	LED
Brightness Output	2000 lumens
Display Native Resolution	800 x 480
Display Color	16.7K
Projection Size	30-100 inch
HDMI Input Supported Video Resolution.	1080p, 1080i, 720p, 576i, 480p, and 480i
Signal Port	Video / VGA / HDMI
USB Port	Support USB device up to 32GB Support format mpeg1, Mpeg2, mpeg4, mp3, Jpeg
SD Card	Support SD card up to 32GB Support format mpeg1, Mpeg2, mpeg4, mp3, Jpeg
Power Consumption	Operating 36W; Standby 0.8W
Power Input Connect Included Adapter	DC 12V, 3.5A
Included Adapter Connect DC input of unit	Input AC100-240V, 50/60Hz Output DC12V, 3.5 A

Weight and Dimensions

Weight	0.9 KG
Dimension	203 x 150 x 82 mm