DVD Player
EN
19
Basic Playback Features
1. To select the DVD/CD input source, press SOURCE on the
main unit until "DVD/CD" appears on the display. You may
also directly press DVD/CD on the remote.
2. Press OPEN/CLOSE to
open the tray and load a
disc, with the label facing
up. Press OPEN/CLOSE again
to close the tray.
3. Press PLAY/PAUSE on the main unit or press PAUSE on
the remote to pause playing during playback. Press again
to resume normal playback.
• Press SKIP REVERSE to go back to the previous chapter
or SKIP FORWARD to move to the next chapter.
• Press STOP once to stop playback and go into resume
mode.
Quick search
1. While playing a disc, press REVERSE on the remote con-
trol to scan backward through the disc. Press FORWARD on
the remote to scan forward.
Press repeatedly to change the searching speed to 1,2 or 3
times for VCD and 1,2,3 or 4 for DVD.
2. Press PLAY at any time to resume normal playback.
Time search
1. Press INFO on the remote, info bar will appear.
2. Press OK on the remote when time is highlighted.
3. Use the number buttons to input the time you want to
skip to.
4. Press OK on the remote to confirm.
Freeze frame, frame advance
1. Press PAUSE on the remote control to freeze the picture
during playback.
2. Press PAUSE on the remote control continously to
advance frame by frame.
3. Press PLAY to resume normal playback.
To Next Page
Loading...
