CD / mp3 Player
EN
33
CD / mp3 Player
32
Bookmarks (Audio CDs Only)
The bookmark feature allows you to mark a point on the
disc for quick access. 6 bookmarks can be selected.
Adding Bookmarks (Audio CDs Only)
1. Refer to “General use” on page 32 to open the
bookmark menu.
2. Use the arrow keys to highlight the “Bookmark” option,
then press OK to enter bookmark menu.
3. Use the arrow keys to select a bookmark location, then
press OK to add bookmark when you reaching a point of
interest.
4. To add another bookmark, move the cursor to the right
and then press OK when reaching another point of inter-
est.
5. Press CLEAR to exit menu.
Recalling bookmarks
1. Refer to “General use” on page 32 to open the
bookmark menu.
2. Use the arrow keys to highlight the “Bookmark” option,
then press OK to enter bookmark menu.
3. Use the arrow keys to select a bookmark location, then
press OK to recall the bookmarked point.
4. Press CLEAR to exit menu.
Clearing bookmarks
1. Refer to “General use” on page 32 to open the
bookmark menu.
2. Use the arrow keys to highlight the “Bookmark” option,
then press OK to enter bookmark menu.
3. Use the arrow keys to select a bookmark location, when
you see a trach icon, select it and press OK will erase this
bookmark.
The bookmarks are cleared each time a disc is removed
from the player or when the power is turned off
completely.
If all 6 bookmarks are in use, you can still mark new points
but the previous bookmarks will be erased.
Time display (Audio CDs Only)
1. Refer to “General use” on page 32 to open the time
display menu.
2. Press the arrow keys to move the cursor to the time dis-
play box, then you can press UP to switch among "Track
Elapsed", "Track Remain", “Disc Elapsed” and “Disc
Remain” time during playback. The selected mode is dis-
played on the banner.
On- screen banner display for CD playback
General use
1. Press INFO on the remote control to hide and show
the on- screen banner. (Only audio CD banner)
2. Use LEFT / RIGHT to move the cursor on the banner. The
selected feature icon will be highlighted.
3. Press UP / DOWN to change setting of the selected fea-
ture.
Selecting a track
1. Refer to “General use” to open the track menu.
2. Enter a track number. Start any single-digit track num-
ber by a 0 (e.g. 9 = 09).
Playmode selection for CD
There are several options for this feature.
1. Standard – normal CD playback
2. Program – plays the programmed tracks (usable in stop
mode only)
3. Random All Disc – randomly plays all audio CD in the
tray repeatedly. (works only if at least one of the discs is an
audio CD.)
4. Repeat All Disc– plays all audio CD in the tray repeat-
edly. (works only when at least one of the discs is audio
CD.)
5. Random – randomly plays all the tracks of that disc.
6. Repeat Track – plays one track over repeatedly.
7. Repeat Disc – repeatedly plays the selected or currently
playing disc.
8. Repeat A-B – repeatedly plays the selected time frame.
Program
Program edit - can be activated in STOP mode only.
Program play - can be activated in STOP mode only.
To Next Page
Loading...
