DVD Player
EN
27
DVD Player
26
Subtitle language
This step will define the default subtitle language.
Choosing a subtitle language from the on-screen banner
display will only overwrite this setting temporarily.
1. Open the subtitle language menu.
2. Press UP/DOWN to select a language and then press OK.
Menu language
This step will define the language of menus and other
short messages shown on screen.
1. Open the menu language menu.
2. Use UP/DOWN to select the language and then press OK
to return to the main menu.
Rating (Parental control)
This setting prevents the playback of DVDs that may not be
suitable for all audiences, by using the rating level that may
be encoded on the disc. If the rating level of the disc is
higher than the preset level (to be set in this step), the play-
back will be prohibited unless the password (see next step)
is entered.
1. Open the rating menu.
2. Use UP/DOWN to highlight the rating which require a
password to start disc playback. Press OK to return to the
main menu. Ratings highlighted in blue require a password.
The rating feature works in accordance with the rating
encoded in the DVD disc software. Keep in mind that not
all movies and discs are rated. In addition to the five stan-
dard (MPAA) rating symbols of “G” (level 2), “PG” (Parental
Guidance, level 4), “PG13” (Parental Guidance and 13 years
old, level 4), “R” (Restricted, level 6) and ”NC17” (from 17
years old, level 7), the player includes a total of 8 rating
steps, corresponding to the existing disc rating steps. These
additional steps allow for a better control the of program
playback for all audiences.
Level 8: All DVDs can be played (Factory preset).
Level 7 to 2: DVDs for general audiences/ children can be
played.
Level 1: DVDs for children can be played, DVDs for adults/
general audiences are prohibited.
Password
Set password
To disable the viewing of rated DVDs, a four-digit password
must be selected.
1. Open the “Lock” menu.
2. Select “Lock On” and press OK.
3. Use the number buttons to enter the password and then
press OK.
4. Repeat step 3 to confirm the password.