20
Setting Up the VCR
When a duration time has been set:
• The VCR will automaticalltswitch torewind if thecounter
meets or goes past the Auto Repeat set duration.
• The VCR willautomaticallyswitch toplayback during rewind if
the counter equlas or is less than 0:00.
• The Auto Repeat may be adjusted by setting the counter to
00:00. This can be done by pressing the CLEAR button while
the tape counter is on screen or on the front panel display.
• The counter willnot reset while rewinding in an Auto Repeat
loop.
AUTO REPEAT
Set the length of time
you want the tape to
play in a repeating loop
Loop from 0:00 to
-:--
(h:mm)
Press CLEAR to turn off
Press MENU to exit
The Auto Repeat dialog box allows a
segment of tape to be set to play in an
indefinite loop over and over.
To Next Page
Loading...
