Need help?Do you have a question about the RCF P3108 and is the answer not in the manual?
Configures the P 3108 as a sealed box for IP 55 protection by covering the reflex port.
Installation by qualified personnel, ensuring secure mounting and suitable support structures.
Detailed steps for connecting the loudspeaker using an Amphenol type connector.
Guidance on matching loudspeaker impedance to amplifier output and ensuring adequate power.
Technical details for the system including impedance, power, frequency response, and dimensions.
Details on LF and HF drivers, including type, impedance, power, and sensitivity.
Configures the P 3108 as a sealed box for IP 55 protection by covering the reflex port.
Installation by qualified personnel, ensuring secure mounting and suitable support structures.
Detailed steps for connecting the loudspeaker using an Amphenol type connector.
Guidance on matching loudspeaker impedance to amplifier output and ensuring adequate power.
Technical details for the system including impedance, power, frequency response, and dimensions.
Details on LF and HF drivers, including type, impedance, power, and sensitivity.
General| Vertical coverage angle | 60° |
|---|---|
| Power Handling | 300 W RMS |
| Input Connector | 2 x Speakon NL4 |
| Cabinet Material | Baltic birch plywood |
| Grille | Steel |
| Color | Black |
| Woofer Size | 8 inch |
| Type | Passive Speaker |
| Nominal Impedance | 8 Ohms |
| Recommended Amplifier | 600 W |
| Crossover Frequencies | 1800 Hz |
| Hardware | M10 suspension points |
| LF Driver | 8" woofer |
| HF Driver | 1 inch compression driver |
| Peak Power Handling | 1200 W |
To Next Page
