RCF UP 4242 - Page 16

UP 4242 • UP 4482 Specifications
Type
240 W - Mono - Table - top (UP 4242)
480 W -Mono- Table - top (UP 4482)
Output power
nominal: 240 W (UP 4242)
480 W (UP 4482)
maximum: 330 W (10 msec ON –
0.1 sec OFF) – UP 4242
650 W (10 msec ON –
0.1 sec OFF) – UP 4482
Frequency response
50 - 16,000 Hz (±3 dB)
Distortion
≤1 % (1 kHz – nominal power)
Signal/noise ratio
≥90 dB
Inputs / Sensitivity – Impedance
INPUT 1: 775 mV -
100 kΩ (bal.) - 50 kΩ (unbal.)
INPUT 2: adjustable 775 mV (0 dB) - 77 mV
(-20 dB) - 20 kΩ (bal.) - 10 kΩ (unbal.)
Outputs for speakers / ohms
4 Ω - 8 Ω
Outputs for speakers / volts
50 V - 70 V - 100 V
(10 Ω - 20 Ω - 40 Ω ) – UP 4242
50 V – 70 V – 100 V
(5 Ω - 10 Ω - 20 Ω ) – UP 4482
Tone controls
low: ± 12 dB - 80 Hz
middle: parametric 250 Hz - 8 kHz / ± 12 dB
high: ± 12 dB - 12 kHz
16
“PROTECT.OUT” relay contact capacity (on resistive load)
0.5 A - 120 Vac
1 A - 24 Vdc
Controls
1 master volume control (front panel)
1 high tone control (rear panel)
2 middle tone controls (rear panel)
1 low tone control (rear panel)
Power supply / Max. consumption
115/230 Vac (± 5%) -
50/60 Hz / 500 VA (UP 4242)
115/230 Vac (± 5%) –
50/60 Hz / 1000 VA (UP 4482)
Absorption in direct current (24 V)
20 A (UP 4242) • 40A (UP 4482)
Maximum ambient temperature
55° C
Dimensions (lxhxd)
433 x 88 x 382 mm
Weight
16 kg (UP 4242) • 20 kg (UP 4482)