RCm R850N - User Manual

Questions and Answers

A
anthony13Aug 20, 2025
Why does my RCm Blower leave dirt behind?
- J
  johnsontiffanyAug 20, 2025
  If your RCm Blower isn't picking up large particles or leaves dirt behind, several issues could be the cause. First, the working speed might be too fast; try reducing it. Second, the brush pressure might be too light; consider adjusting it. Third, the brush could be worn and need replacement. Fourth, check for and remove any string or wire entangled in the brush. Finally, the main brush collector might be encrusted, in which case you should clean it using an iron spatula.
A
Aaron BeckerAug 22, 2025
What to do if the main brush fails to turn on my RCm Blower?
- M
  Mr. James MillerAug 22, 2025
  If the main brush on your RCm Blower fails to turn, there are several potential causes. The brush and transmission belts might be broken and need replacement. Alternatively, the belt tightener might not be working and needs adjustment. In electric versions, the electric motors (or their carbon brushes) for side brushes might be worn out and need checking or replacement.
M
Michelle HarrisAug 25, 2025
Why is my RCm Blower leaving dust on the floor?
- S
  Shawn ClarkAug 25, 2025
  If your RCm Blower leaves dust on the floor or dust comes out from the flaps, several things could be wrong. The suction fan might be broken and needs checking. The filters might be clogged and need cleaning. The filter seals could be faulty and need replacement. The flaps might be worn and need replacement. The seals of the refuse bin might also need replacement.
H
Hector OwensAug 26, 2025
Why do the batteries on my RCm Blower not maintain their charge?
- I
  Isabella OliverAug 26, 2025
  If the batteries in your electric RCm Blower are not maintaining their charge, several factors could be responsible. The electrolyte level might be low; top it up. Battery cells could be burned out, requiring battery replacement. The motor might be overloaded; check the motor current absorption. Battery terminals could be loose; check and tighten them. Material might be entangled in the main brush; remove it. A bearing might be seized, needing bearing replacement. Finally, excessive brush pressure could be the cause; reduce the brush pressure.
B
brobinsonAug 28, 2025
What causes the brush and suction fan motor to not work on my RCm Blower?
- R
  Raymond FloresAug 28, 2025
  If the brush and suction fan motor on your electric RCm Blower does not work, the fuses might be blown and need replacement. Alternatively, the motors could be defective or broken and need checking or replacement.
B
Barbara AlvaradoAug 30, 2025
Why does dust come out of the bin of my RCm Blower?
- E
  Eric ChungAug 30, 2025
  If dust and waste are coming out of the bin of your RCm Blower, it could be due to several reasons. The bin might be too full, so empty it more frequently. The bin might not be correctly closed, so ensure it is closed properly. The bin seal might be broken, so replace the seal.
J
Jeffrey JohnsonSep 1, 2025
How to fix a RCm Blower that discharges quickly?
- A
  andersonsamanthaSep 1, 2025
  If the battery in your electric RCm Blower discharges quickly, it may be due to insufficient charge time; try increasing the charge time. Alternatively, battery cells could be burned out, requiring battery replacement.
M
Michael RileySep 2, 2025
What to do if the filter shaker on my RCm Blower doesn't work?
- R
  Robert ParkSep 3, 2025
  If the filter shaker on your RCm Blower does not work, the filter shaker itself might be faulty and needs replacement. The fuse could be burned out and needs replacement. Excessive motor absorption could be the cause, due to worn motor carbon brushes, dirty or worn bearings, or a burned-out armature or windings, all of which would require replacement.
C
Cynthia RichardsonSep 5, 2025
Why won't my RCm Blower pick up paper?
- K
  Kristin ScottSep 5, 2025
  If your RCm Blower fails to pick up paper, leaves, etc., the front flap lifting system might not be working and needs repair.
B
briannawhiteSep 7, 2025
Why does neither forward nor reverse drive work on my RCm Blower?
- M
  Miss Deborah Bell DDSSep 7, 2025
  If neither the forward nor reverse drive works on your RCm Blower, the drive motor cables might be disconnected and need checking. The drive pedal could be defective and its functioning needs to be checked. The control unit might be faulty and its functioning needs checking. The main fuse might be blown and needs replacement.